Table of Contents
Advertisement
Precautions in handling the ink cartridge
• Be sure to use MIMAKI Genuine Ink cartridges and ink packs.
• Never dismantle the ink cartridge.
• The ink is not toxic. However, avoid direct contact with the ink. If ink
• Do not shake the ink cartridge and ink packs violently. Shaking or turning
• Never refill the ink cartridge and ink packs with ink. This might cause a
• Using third-party ink or ink cartridges and ink packs may cause a trouble.
• If the ink cartridge and ink packs is moved from a cold place to a warm
• Make sure to thoroughly consume the ink in the ink cartridge and ink
• Store ink cartridges and ink packs in a place that is out of the reach of
• Dispose empty ink cartridges, ink packs and waste ink in accordance with
• Do not use expired ink cartridges and ink packs. The expiration date is
• Do not touch or stain the contact of the ink cartridge and ink pack PCB, as
• Store the uninstalled ink cartridge and ink pack in a cold and dark place.
Display of ink type
Ink type is displayed when an ink cartridge is newly set, an ink cartridge of different type is set.
contacts the skin, immediately wash it off with detergent or water. In the
event that ink gets in eyes, immediately rinse it off with a plenty of running
water and consult a medical doctor.
it roughly can cause leakage of ink.
trouble. Mimaki assumes no responsibility for any damage caused by
using replenished ink cartridges.
The user shall be charged for a repair to correct any damage resulting
from these inks or ink cartridges even if under warranty period.
place, leave it in the room temperature for three hours or more before
using.
packs, once it is opened, within six months. If an extended period of time
has passed after opening the cartridge tank, printing quality would be poor.
children.
national and local ordinances effective in your area.
printed on the ink cartridge.
this may cause failure of the PCB.
Ink Type
Type
: Acid
Acid dye ink [Acid]
- 1.27 -
Advertisement
Table of Contents
