Troubles For Which Error Messages Are Given On The Lcd; Errors Accompanied By Warnings - MIMAKI Textile Jet Tx3-1600 Operation Manual

Troubles For Which Error Messages Are Given On The LCD

If something is wrong with the device, the buzzer sounds and a corresponding error message is given
on the LCD. Take an appropriate corrective measure in accordance with the message.

Errors accompanied by warnings

These errors arise on the ink-related components.
Warning message
Ink End
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Near End
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Cartridge
1 2 3 4 5 6 7 8 A B C D E F G H
Cartridge InkEnd
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Color Error
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Type Error
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Limit
1 2 3 4 5 6 7 8 A B C D E F G H
Ink IC Error
1 2 3 4 5 6 7 8 A B C D E F G H
Cartridge Error
1 2 3 4 5 6 7 8 A B C D E F G H
Unidentified Ink
1 2 3 4 5 6 7 8 A B C D E F G H
Ink Low
1 2 3 4 5 6 7 8 A B C D E F G H
Cause
Filled ink is end.
Filled ink is near end.
Ink cartridge is not loaded on the
ink station.
The inside of the ink cartridge is
end.
The color of the ink cartridge
loaded is different from the filled
one previously.
The type of the ink cartridge
loaded is different from the filled
one previously.
The ink cartridge is expired or
close to expire.
The IC chip of the ink cartridge
could not be read normally.
Abnormal information occurred in
the ink IC.
The set ink cartridge is not a
genuine product.
Ink is not enough to perform ink
filling.
- 6.6 -
Corrective measure
Replace the ink cartridge of which
number is shown on the LCD with
a new one. And close the ink
station cover.
Printing can be continued in file-by-
file basis. However, it is
recommended to replace the ink
cartridge of which number is shown
on the LCD with a new one. And
close the ink station cover.
Attach the ink cartridge(s)
corresponding with the number(s)
shown on the display.
Replace the ink cartridge of which
number is shown on the LCD with
a new one.
Check the color of the ink cartridge
with the number displayed.
Check the type of the ink cartridge
loaded.
Check the validity of the loaded ink
cartridge.
Insert an ink cartridge with the
displayed number again.
If the same error message appears
again on the LCD, contact your
local distributor to call for service.
Change an ink cartridge with the
displayed number.
Use the genuine ink cartridge with
IC chip.
Reinstall the ink cartridge which
has ink left.