COLOR INKJET PRINTER Model No. JV400-160 (SGPR762-160) JV400-130 (SGPR762-130) Manufacturer 2182-3, Shigeno-otsu, Tomi, Nagano, 389-0512, JAPAN Authorised Compiler MIMAKI EUROPE B.V. in the Community Stammerdijk 7E 1112 AA Diemen, The Netherlands Directives Machinery Directive 2006/42/EC Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC The above product has been evaluated for conformity with above directives using the following European standards.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. In the case where MIMAKI-recommended cable is not used for connection of this device, limits provided by FCC rules can be exceeded.
Safety Precautions Symbols Symbols are used in this Operation Manual for safe operation and for prevention of damage to the machine. The indicated sign is different depending on the content of caution. Symbols and their meanings are given below. Please follow these instructions as you read this manual. Examples of symbols Meaning Failure to observe the instructions given with this symbol can result in death or serious injuries...
Check first that the machine no longer produces smoke, and then contact your distributor or a sales office of MIMAKI for repair. • Never repair your machine by yourself since it is very dangerous for you to do so.
Page 7
MIMAKI. UV light • There is some leaking of ultraviolet radiation around the UV irradiation device.UV light applied to your skin might cause inflammation and/or skin cancer.Though weak UV light might cause no inflammation, repeated...
• The machine does not operate with any ink other than the Handling of media JV400-SUV genuine ink. • Use media recommended by MIMAKI to ensure reliable, • Do not use the JV400-SUV genuine ink with other high-quality printing. printers, as doing so may cause damage to such •...
Page 9
• The UV lamp performance and service life are significantly affected by the UV irradiation and UV power supply units used.Never use those UV devices other than those recommended by Mimaki.We would take no responsibility for any troubles caused through the use of a UV devices not recommended by Mimaki.
Safety Precautions Cautions on Installation CAUTION A place exposed to direct A place where temperature or On an inclined surface sunlight humidity varies significantly • Use the machine under the following environmental conditions: • Operating environment: 20 to 30 °C (68 to 95 °F) 35 to 65 % (Rh) A place exposed to direct air...
Need help?
Do you have a question about the JV400-SUV SERIES and is the answer not in the manual?
Questions and answers