Canon iPF6400S User Manual page 242

Adjustment pattern setting dialog box
Adjustment Item
•
Selects the items to change in steps.
For color, you can select Cyan, Magenta, Yellow, Gray Tone, Brightness, Contrast, or Saturation.
For monochrome, you can select X Color Balance, Y Color Balance, Tone, Brightness, Contrast,
Highlight, Shadow, or Tint.
The icons for Horizontal Axis Adjustment Item are displayed above the preview area and the icons for
Vertical Axis Adjustment Item are displayed on the left of the preview area.
Note
Number of Patterns
•
You can select the number of images to display in the pattern in the horizontal or vertical direction from 3,
5, and 7. If the adjustment item is Tone, you can select 3 or 5. When Tone is selected as the adjustment
value, -1 is Soft tone, 0 is Middle tone, 2 is Medium-hard tone, 3 is Hard tone, and 5 is Strong-hard
tone.
Adjustment Value Spacing
•
You can select the interval of the variation in adjustment values between neighboring adjustment pattern
images from the range of 1 to 10. The larger the value, the greater the differences between the states of
the adjustment pattern images. Note that if the adjustment item is Tone, the Adjustment Value Spacing
cannot be selected.
(Swap) button
•
Rearranges the adjustment pattern with the Horizontal Axis and Vertical Axis adjustment items swap-
ped.
• Rotate 90 degrees
Rotating the image may make it easier to conserve paper and compare images.
Select Per Image to rotate each of the images in the adjustment pattern by 90 degrees.
Select Entire Image after layout to rotate the entire adjustment pattern by 90 degrees.
When None is selected, the image is not rotated.
• Pattern Size
You can specify the size of the image when printing the adjustment pattern.
When Auto is selected, the image is enlarged or reduced to fit the adjustment pattern into the Use Paper
Size.
When Dimensions is selected, the image is printed at the input image size without enlarging or reducing.
Dimensions cannot be selected when the paper feed method is Manual.
If the input image size is large, check the Paper Size before starting printing because it may be larger than the
•
actual printed material size.
Note
• Select Dimensions in Pattern Size to print at the input image size without enlarging or reducing the images.
• Patterns that extend past the horizontal width of the paper are printed wrapped onto the next line.
• Pattern Spacing
You can select None or Available. If Available is selected, you can insert a background between each image.
The background color can be specified in Pattern Background.
• Pattern Background
You can select the background color from White, Black, and Gray.
If it is difficult to compare the differences between neighboring adjustment pattern images, changing the back-
ground color may make it easier to compare. The Pattern Spacing can be selected if Pattern Background is
242
Available.
• Update Base Values in the Color Settings Sheet
Select this check box and click the Close button to apply the setting values (standard values) of the image
enclosed in the blue frame in the center of the preview area in the Color Settings sheet (color or mono-
chrome).
• None can only be selected for Vertical Axis in both color and monochrome.
iPF6400S
User's Guide