Cleaning The Spectrophotometer Unit (Option) Parts - Canon iPF6400S User Manual

Hide thumbs Also See for iPF6400S:

Table of Contents

Fold a sheet of Plain Paper two or three times (a) and

insert it under the Paper Retainer (b) from behind the

printer to wipe the entire surface of the Paper Retain-

Attach the Roll Feed Unit. (See "Installing the Roll Feed Unit.")

Plug the power cord into the outlet.

Cleaning the Spectrophotometer Unit (option) Parts

Clean the Spectrophotometer Unit parts as follows.

Cleaning the White Calibration Tile

Turn the printer off.

(See "Turning the Printer On and Off.")

Unplug the power cord from the outlet.

Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the

printer on poses a risk of injury if you touch moving parts inside the printer.

Open the Spectrophotometer Unit Cover.

Press down on the center (near the blue label) of the

Up-down Unit to lower the Up-down Unit.

User's Guide

Cleaning the Spectrophotometer Unit (option) Parts