Color Settings Sheet (Monochrome) - Canon iPF6400S User Manual

Hide thumbs Also See for iPF6400S:

Table of Contents

Color Settings Sheet (Monochrome)

Adjustment pattern setting button

When this button is clicked, the Adjustment pattern setting dialog box is displayed. The Adjustment pattern

setting dialog box allows you to print an adjustment pattern with adjustment values that vary in steps up and

down, and to select your preferred adjustment values.

For details on Adjustment pattern setting, see "Adjustment pattern setting dialog box."

Curves button

Click the button to open the Curves dialog box then set the Channel and other settings.

For more information about Curves, see "Curves Dialog Box."

Defaults button

Click the button to return all of the settings on the Color Settings sheet to their defaults.

This screen allows you to adjust settings such as the Color Balance, Tone, Brightness, and Contrast to config-

ure the printing result to be closer to your expected tone and gradation.

This is displayed when Auto (Monochrome Photo) is selected in the Output Profile on the Main Sheet

You can check a preview of the adjusted state for the following items.

Color Balance, Tone, Brightness, Contrast, Highlight, Shadow, and Tint

Color Balance

Allow you to select the color balance to suit your application.

Adjust the color balance as you check the color tone in the adjustment area.

You can adjust the square area in the center by clicking or dragging it.

Drag the vertical or horizontal scroll bars for adjustment, as desired.

You can click the arrows by the X (horizontal) and Y (vertical) boxes or enter the values directly.

You can adjust the brightness of intermediate tones in an image. Selecting Hard tone gives a hard impression

with more definition. Selecting Soft tone gives a soft impression.

You can adjust the brightness of the printed image without losing the brightest and darkest areas by either

inputting a numerical value or dragging the slide bar.

You can relatively adjust the brightness of the brightest and darkness areas by either inputting a numerical

value or dragging the slide bar.

Adjust the brightness of the lightest portion.

User's Guide