Canon iPF6400S User Manual page 488

Specifying the Cutting Method for Rolls
9
Press ▲ or ▼ to align the paper leading edge (a) with
the leading edge (c) of the metal plate (b) on the output
tray.
Caution
Note
10
Print the job.
The printer stops advancing the paper after printing.
Note
11
Press the Feed button.
Roll paper is fed to the specified cut position and then automati-
cally stopped.
12
Cut the roll paper manually with scissors or the like.
488
Important
• Do not touch the metal plate (b) as doing so may cause injuries.
• If the Spectrophotometer Unit (optional) is mounted, align the paper leading edge with the leading edge (c) of
the metal plate while looking from the output tray of the Spectrophotometer Unit.
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it can
be printed without the margin of about 23 cm being created at the paper leading edge.
• Cut at the dotted line printed on the paper. If you cut on the printer side of the dotted line, the paper leading
edge may rub against the printhead and may deviate from the paper retainer.
iPF6400S
User's Guide