Print Selected Area(Excel) - Canon iPF6400S User Manual

Print Selected Area(Excel)

Note
5
Select Roll Paper Width that is set in the printer.
6
Select image size.
7
Select layout.
8
To configure Binding, click the Binding Settings button.
Refer to "Configuring Binding (Excel)"
9
Select Next.
10
Select Media Type.
11
Enter Copies.
Note
12
If the upper and lower margins are too wide, check No Spaces at Top or Bottom (Conserve Paper).
The upper and lower margins can be checked in Print Preview.
13
Press Print to start printing.
Important

Print Selected Area(Excel)

Print Selected Area(Excel)
312
For resizing the selected range of cells to fit the roll width. Choose this option to enlarge a particular part of the
sheet before printing.
1
Start Microsoft Excel.
• If data analysis requires time, a message dialog will appear. If you select No, you will return to the application.
• When Print in Draft mode is selected, printing is fast but the print quality is poor.
• When Saturation is selected, you can print posters, etc., vividly.
• Press the Print Preview button to display the preview screen. You can check and make changes to the layout
in the preview screen.
• When you print to the edge of the roll width, the maximum print length is 18.0m.
• If divided into plural pages, try reducing the data size or the range you select.
• You cannot run Print or Print Preview if you select it for a worksheet with no data displayed.
for details on the procedure for configuring Binding.
P.315
➔
iPF6400S
User's Guide