Canon iPF6400S User Manual page 558

Add Custom Paper
Automatic Cutting Settings
Drying Time
Borderless Printing
Important
10
The Step 5: Configure the amount of ink used dia-
log box is displayed.
The upper limit on the amount of ink used to print to
the custom paper is set on this screen by selecting
from among several levels.
First, click the Test Print button to perform a test
print of each level.
Note
558
Setting
•
Specify the time that the printer waits for ink to dry, as needed.
•
•
Configures whether or not to permit borderless printing.
•
•
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed deteriora-
tion of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use the cutter unit,
and instead cut the roll paper using scissors, etc. after printing. In this case, select User Cut as the Automatic
Cutting Settings.
• If borderless printing is performed on paper where the ink drying is poor, the cutter unit may leave scratches
where it touches the printed surface, or may not cut correctly. In this kind of situation, configure the amount of
time to wait for the ink to dry after printing using Drying Time. Alternatively, if the paper cannot be cut well by
the cutter, set the Automatic Cutting Settings to User Cut and cut the roll paper using scissors, etc.
• Paper where borderless printing can be performed is limited by the media type and roll paper width. Refer to
"Compatible Paper"
P.554
➔
• For custom paper where there is a need to set the Automatic Cutting Settings to User Cut, set the Border-
less Printing to Deny.
• If a standard paper that does not display the Name in Printer Driver is selected in the screen in Step 5, you
cannot perform test prints or configure the maximum amount of ink to use.
User Cut:Cutting is not performed by the cutter unit. Cut the roll paper using scissors
after each sheet. Select this for paper that cannot be cut by the cutter unit.
Off:Ejects immediately after printing finishes.
30 sec./1 min./3 min./5 min./10 min./30 min./60 min.:Ejects after the specified time has
elapsed after printing finishes.
Permit: Borderless printing is permitted.
Deny: Borderless printing is denied.
.
Details
iPF6400S
User's Guide