View Settings Dialog Box For The Printing Application - Canon iPF6400S User Manual

Hide thumbs Also See for iPF6400S:

Table of Contents

Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automat-

ic cutting is used.

Setting Item

Printer Default

Calibration Value

You can specify whether to apply the results of calibration performed on the printer to image processing.

Setting Item

Printer Default

Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image

with the left and right sides inverted.

View Settings Dialog Box for the Printing Application

In the View Settings dialog box, you can check details of the selected printing application.

To display the View Settings dialog box, on the Main sheet, click View Settings by Print Target. (See "Main

Print Target

Shows all Print Target options (settings items for the printing application).

Identifies the item selected in Print Target by its name and an icon.

Here, you can confirm detailed settings values for each listed item for the selected Print Target.

User's Guide

The setting of the control panel of the printer is applied.

When the Standard setting does not result in cutting the surface cleanly, select this.

Select this when you do not have any problems in automatic cutting.

This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select

it when using adhesive paper.

The setting of the control panel of the printer is applied.

Print using the calibration results.

Print without using the calibration results. Select this to avoid the changing of the color of im-

ages during printing by color calibration.

View Settings Dialog Box for the Printing Application