iPF6400S
9
C
Select the
Enlarged/Reduced Printing check box.
C
•
If the
displayed on the Page Setup sheet, clear the
Note
derless Printing check box.
10
E
Click
Fit Roll Paper Width.
•
After you click
roll in the Roll Paper Width list and click OK.
Note
•
Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
For tips on confirming print settings, see "Confirming Print Settings ."
•
Note
Resizing Originals to Fit the Roll Width (Mac OS)
Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-
ple.
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
•
1
B
This sets the
Format for and
The configuration method varies depending on the OS
•
and application software you are using.
Note
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attrib-
utes dialog box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
User's Guide
Enlarged/Reduced Printing check box is not
E
Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded
C
Paper Size.
Resizing Originals to Fit the Roll Width (Mac OS)
B
Bor-
P.153
➔
67