iPF6400S
Output Settings Panel
Output Settings Panel
This panel appears when you select Output Settings in the dialog area.
•
Enlarged/Reduced Printing
Select the method for enlarged/reduced printing.
The following settings are available for enlarged/reduced printing.
Setting
Fit Paper Size
Fit Roll Paper Width
Scaling
•
Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specif-
ic media type is used.
For more information about Borderless Printing, see "Print with No Borders."
•
Available only if rolls are selected in Paper Source.
•
This is not displayed when a checkmark is placed in Print Centered.
Note
•
Paper Size
You can select the size of the print media.
User's Guide
Enlarges/reduces the whole page automatically to fit the media size selected for output. Select
the media size to print from Paper Size.
Enlarges/reduces the whole page automatically to fit the width of the roll paper with the page
width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper Width in
the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value in
numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that does
not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Output Settings Panel
Details
P.355
➔
345