Replacing the Maintenance Cartridge
Important
2
Remove the Ejection Guide.
Important
Note
3
Pull out the used Maintenance Cartridge by the grip
(a). Holding the cartridge by the handles (b) on both
sides, keep the cartridge level as you remove it.
834
Important
Never touch the metal contacts (a). This may damage
•
the Maintenance Cartridge.
If the Spectrophotometer Eject Guide is lowered while
•
the optional Spectrophotometer Unit is mounted, open
the Spectrophotometer Unit Cover and lift up the cen-
tral part (near the blue label) of the Up-down Unit.
Lifting up the ends of the Up-down Unit may cause
damage.
If the Spectrophotometer Unit is mounted, grasp the blue han-
•
dles on the left and right sides of the Spectrophotometer Eject
Guide and remove the Spectrophotometer Eject Guide from
the Spectrophotometer Unit.
•
Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge level during
removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may leak and cause
stains.
The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Maintenance
•
Cartridge in another printer.
iPF6400S
User's Guide