Cutting Roll Paper After Printing (Mac Os) - Canon iPF6400S User Manual

Hide thumbs Also See for iPF6400S:

Table of Contents

Cutting Roll Paper After Printing (Mac OS)

Click OK to close the Roll Paper Options dialog box.

Confirm the print settings and print as desired.

Roll paper will be automatically cut after printing.

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to

print a cut line for manual cutting.

The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below

to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.

This sets the

Select the printer in the

Choose the original size in the

If you configured the settings using the Page Attributes dialog box, click

then select Print from the application software menu.

For tips on confirming print settings, see "Confirming Print Settings ."

Format for and

The configuration method varies depending on the OS

and application software you are using.

If Page Setup is displayed in the application menu, the

settings are configured by opening the Page Attrib-

utes dialog box from Page Setup.

If it is not displayed, the settings are configured in the up-

per part of the printer driver displayed when you select

Print from the application software menu.

Printer list.

Paper Size list.

OK to close the dialog box, and

User's Guide