Canon iPF6400S User Manual page 633

iPF6400S
• Before specifying the frame type, make sure the printer is on and connected to the network.
Important
• You can specify the frame type by using RemoteUI if the printer's IP address is configured.
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF Device Setup Utili-
Note
.
ty."
P.645
➔
Specifying the frame type using imagePROGRAF Device Setup Utility
1
Start imagePROGRAF Device Setup Utility.
2
In the list of printers, select the printer to configure.
3
Choose Protocol Settings from the Printer menu.
4
Click the NetWare tab and select the frame type in
the NetWare Frame Type list.
User's Guide
Specifying the Printer's Frame Type
633