Canon iPF6400S User Manual page 530

Hide thumbs Also See for iPF6400S:

Table of Contents

Add Custom Paper

Determine and set the ink level that is thought to give the

best visual test print results with no bleeding or scraping of

Configure Head Height and Vacuum Strength as

required and click the Next button.

Usually, these do not need to be set.

Select the optimal ink level by referring to the help.

If you cannot obtain sufficiently high quality printing no matter which maximum ink usage level you select, use

the Step 1: Select the standard paper dialog box to change the paper that is the basis of the custom paper to

another paper.

Because this settings imposes an upper limit on the amount of ink used during printing, the printing result might

not change even if the level is changed depending on the image.

The color tone cannot be configured using the Media Configuration Tool. Although the color tone may change

when the maximum ink usage is changed, at this point you should select the optimal level by only focusing on

bleeding and scraping of ink. If the color tone needs to be adjusted, provide an ICC color profile that matches

the paper you are using, and select that ICC color profile in your software. For details on how to specify the ICC

profile in the printer driver, see "Matching Sheet ."

Depending on the maximum ink usage setting, some of the print qualities in the printer driver may become un-

If you set the Head Height lower than the automatically set height in parentheses ( ), check that the printhead

does not rub against the paper. (If the printhead rubs against the paper, there will be scratches in the printing

results.) If the printhead rubs against the paper, this can cause damage to the printhead.

If you change the Vacuum Strength, check that the printhead is not rubbing against the paper. (If the print-

head rubs against the paper, there will be scratches in the printing results.) If the printhead rubs against the

paper, this can cause damage to the printhead.

For details on the Head Height and Vacuum Strength, refer to the help.

User's Guide

Troubleshooting