Canon iPF6400S User Manual page 475

Hide thumbs Also See for iPF6400S:

Table of Contents

Insert the edge of the roll in the Paper Feed Slot (a)

and advance the roll until you hear the feed tone.

Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing

quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.

If the paper is wrinkled or warped, straighten it out before loading it.

Load paper straight so it is not fed askew.

Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and

the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")

ManageRemain-

For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Reference

Close the Roll Feed Unit Cover.

Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specifying the

Cutting Method for Rolls.")

Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.

(See "Automatic Adjustment to Straighten Lines and Colors.")

If you set the detection of paper leading edge to Do not perform, a margin of about 23 cm is created at the

paper leading edge when printing starts. (See "Specifying the Cutting Method for Rolls.")

User's Guide

A menu for selection of the type of paper is shown on the Display Screen.

Press ▲ or ▼ to select the type of paper, and then press the OK button.

The type and amount of paper left is automatically detected based on the barcode printed on the roll.

There is no need to specify the type and length of the paper.

A menu for selection of the type and length of paper is shown on the Display Screen.

Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.

Printer Operation After the Paper is Fed

Loading Rolls in the Printer

Troubleshooting