Canon iPF6400S User Manual page 527

iPF6400S
4
The media type names of the Canon genuine paper and feed confirmed paper within the selected category
are shown in Media Type Name. Select the media type to use as the basis of the custom paper, and click
the Next button.
• If you do not know which media type to use as the basis of the custom paper, click the Assist button to open
the Media Type Selection Assistance dialog box, and then set either the Weight (grammage) or the Thick-
Note
ness. The Media Configuration Tool automatically selects the appropriate paper from the selected paper cate-
gory. Alternatively, select the media type called General from among the displayed Media Type Name.
• Depending on the selected category, there might not be a media type called General.
• Depending on the selected category, the Assist button may be disabled.
• Standard paper where Cannot create is displayed in Calibration Target, the calibration target for executing
color calibration cannot be created in the control panel and imagePROGRAF Color Calibration Management
Console.
• For custom paper added using standard paper where Can create for Auto Adjust (High Precision) is dis-
played in Calibration Target, the calibration target for executing color calibration Auto Adjust cannot be cre-
ated in the control panel and imagePROGRAF Color Calibration Management Console. A calibration target can
only be created for executing Auto Adjust (High Precision).
5
The Step 2: Set the custom paper name dialog box
is displayed.
Enter an arbitrary name to display in the printer con-
trol panel and printer driver, and then click the Next
button.
Depending on the selected standard paper, you might not be able to input the Name in Printer Driver and add
•
the created custom paper to the printer driver. To use the custom paper in the printer driver, create it by chang-
Note
ing the standard paper to another paper.
• The characters that can be entered for Name in Printer Driver and Name on Control Panel are stated below.
alphanumeric, space, "-", ".", "_", "(", ")", "+", "%", ",", "/"
• For Name in Printer Driver up to 32 one Byte characters can be entered, and for Name on Control Panel up
to 16 one Byte characters can be entered.
• Paper Name (English) is used in keeping track of the amount of roll paper left, in status print, etc.
For Paper Name (English) up to 16 one Byte characters can be entered.
6
Load the custom paper in the printer and then click
the OK button.
• Do not load paper that is curled or that has already been printed on.
Important
User's Guide
Add Custom Paper
527