Canon iPF6400S User Manual page 590

Menu Settings
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Test Nozzle Check
Print
ColorCheck Print ( *2 )
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Adjust Head
Printer Posi.
Adj.
Feed
Priority
590
Setting Item
Standard
Simple
Other Initial adjustmt
Manual
Adj. Pri- Automatic
ority
Print Quality
Print Length
Adj. Auto(GenuinePpr)
Quality
Description, Instructions
Print a test pattern to check the nozzles.
Executes a color check on the printer using the optional
Spectrophotometer Unit.
Color check is a function that prints and automatically meas-
ures the colors of a test pattern, and calculates the color dif-
ference from a calibration target (standard color values regis-
tered in the printer).
(See "Color Checks Using the Spectrophotometer Unit (op-
tion).")
P.745
➔
This is the same as ColorCheck Print in the level under Cal-
ibration in Adjust Printer.
Print information about the setting values and condition of the
printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type and size,
amount of ink consumed, and so on. Ink consumption indi-
cates a rough estimate of the amount of ink consumed per
print job.( *1 )
Print the menu structure.
An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Select Stand-
ard if vertical lines in printed material are warped or colors
are out of alignment. Select Standard also if the printing re-
sults are not improved by executing Simple. (See "Automatic
Adjustment to Straighten Lines and Colors.")
An adjustment pattern is printed and the print position is au-
tomatically adjusted to fix misaligned printing. Simple exe-
cutes a simple adjustment in a short time. Select Simple
when frequently adjusting the printhead, such as during daily
maintenance. (See "Automatic Adjustment to Straighten Lines
and Colors.")
P.708
➔
Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the printhead,
select Initial adjustmt. (See "Adjustment When Installing the
Printhead.")
P.711
➔
Input the setting values from the adjustment pattern printing
results and adjust the printing position to fix misaligned print-
ing. Normally, select Standard. However, when printing on
special paper, or if printing is not improved after Standard,
try Manual. (See "Manual Adjustment to Straighten Lines and
Colors.")
P.710
➔
Specify exact paper feeding, if desired. Normally, select Au-
tomatic. Choose Print Quality for attractive printing. Choos-
ing Print Quality also makes banding less noticeable.
Choose Print Length if you prefer to feed the paper an exact
amount.
Specify this mode with paper identified in the Paper Refer-
ence Guide. (See "Displaying the Paper Reference
Guide.")
P.464
➔
iPF6400S
P.708
➔
User's Guide