Canon iPF6400S User Manual page 484

Specifying the Cutting Method for Rolls
Manual Use scissors to cut each document from the roll after
(when using printing. For continuous printing (if you will cut each
media that page later), select Auto Cut > Yes or select Print Cut
Guideline.
cannot be
cut with the
Cutter Unit )
Choose this option if you want to cut pages by press-
Paper cut-
ting (to have ing Cutter Unit buttons for manual cutting after printing
the roll cut when Auto Cut > No is selected or Print Cut Guide-
at your line is selected in the printer driver.
Otherwise choose this option if you want to cut the roll
specified
edge after loading a roll.
position)
• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
Note
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the preset
cutting mode.
• If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount before
cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some cases.
Cut rolls manually in the following cases:
Eject (when the paper surface is being scratched / to wait for ink to dry)
• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, printed
documents may be damaged.
Important
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality or
cause rough cut edges.
• Once the following step has been performed, the procedure can be started from step 7 the next time.
Note
• Printing the second and subsequent times
Printing after replacing with the same type of paper
•
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
484
select the Paper tab (
Cutting Method
).
Printer Setting
Media Manual Auto Cut
Menu > Pa- (See "Cut-
per Details ting Roll Pa-
> (Various
per After
Types of
Print-
Paper) >
ing.")
Cutting
➔
Mode
Cut button Yes
pressed
iPF6400S
Driver Setting
No, Yes, Print
Cut Guideline
P.145
No, Print Cut
Guideline
User's Guide