Canon iPF6400S User Manual page 529

iPF6400S
Setting
Drying Time
Borderless Printing
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed deteriora-
tion of the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use the cutter unit,
Important
and instead cut the roll paper using scissors, etc. after printing. In this case, select User Cut as the Automatic
Cutting Settings.
• If borderless printing is performed on paper where the ink drying is poor, the cutter unit may leave scratches
where it touches the printed surface, or may not cut correctly. In this kind of situation, configure the amount of
time to wait for the ink to dry after printing using Drying Time. Alternatively, if the paper cannot be cut well by
the cutter, set the Automatic Cutting Settings to User Cut and cut the roll paper using scissors, etc.
• Paper where borderless printing can be performed is limited by the media type and roll paper width. Refer to
"Compatible Paper"
• For custom paper where there is a need to set the Automatic Cutting Settings to User Cut, set the Border-
less Printing to Deny.
10
The Step 5: Configure the amount of ink used dia-
log box is displayed.
The upper limit on the amount of ink used to print to
the custom paper is set on this screen by selecting
from among several levels.
First, click the Test Print button to perform a test
print of each level.
• If a standard paper that does not display the Name in Printer Driver is selected in the screen in Step 5, you
cannot perform test prints or configure the maximum amount of ink to use.
Note
11
The Test Print Settings dialog box is displayed.
Select the print priority and print quality of the test
print using Print Priority and Print Quality.
Set the level to test print using Maximum ink usage
and the image to use using Image used in test
print, and then click the Start Print button.
User's Guide
• 30 sec./1 min./3 min./5 min./10 min./30 min./60 min.:Ejects after the specified time has
elapsed after printing finishes.
Configures whether or not to permit borderless printing.
• Permit: Borderless printing is permitted.
• Deny: Borderless printing is denied.
.
P.525
➔
Add Custom Paper
Details
529