Riso HC5500 Series User Manual page 86

Specify output condition
A registered output setting can be selected if [Output mode] is not set to [Form]. Also the
storage folder to which output data is stored can be specified and a job comment can be
input.
Click the [Specify output condition] button to display the [Specify output condition]
screen.
~ ~ ~ ~ Settings
Output condition
You can select whether to print according to the printer
driver setting or to print according to output setting reg-
istered in the printer controller.
When printing according to the printer driver setting,
select [Printer driver setting].
When printing according to setting registered in the
printer controller, select one of Direct 1 - Direct 9 (or
any registered name that has been set).
Select the desired setting in the pull-down menu and
click the [OK] button.
The initial setting is [Printer driver setting].
• Register output setting to the printer in [Administra-
tor] of the Console.
"Direct Output Setting" of "HC5500 User's Manual
for Console" )p.2-20
• If the printer is not connected to a network, "Con-
necting to Server..." is displayed.
Folder security code
If you select [Storage] or [Print & Storage] at [Output
mode] and store the data in a folder for which a security
code is set, input the security code.
• The security code for a folder is set at [Administra-
tor] - [Folder setting] of RISO Controller PS7R.
• In a folder for which a security code is set, data can
be stored only if the correct security code is input.
• If the security code is not correct, the data is stored
in folder 0. The stored data cannot be output. (The
data can be deleted only.)
Job comment
You can input a comment to be displayed in the
[Details] screen of [Job Manager].
Up to 128 characters can be entered.
) "Forms" of "HC5500 User's Manual for Console"
3-10
Storage folder name
Output data can be stored in any folder created in the
printer controller.
If [Print & Storage] or [Storage] is selected at [Output
mode] and folders are created in the printer controller,
select one of folder1 - folder9 (or any registered folder-
name that has been set).
Select the desired folder in the pull-down menu and
click the [OK] button.
The initial setting is [Folder 0].
• Create folders in [Administrator] of the Console.
"Folder Setting " of "HC5500 User's Manual for
Console" )p.2-22
• If the printer is not connected to a network, "Con-
necting to server..." is displayed.