Pagination - Riso HC5500 Series User Manual

Pagination

Selects the type of pagination.
~ ~ ~ ~ Settings
OFF (initial setting)
Pagination is not performed.
Multi-up (Single page)
A multiple number of same page are paginated onto a
sheet. The number of pages per sheet can be set at
[Pages per sheet].
Multi-up (Multi-page)
A multiple number of continuous pages are paginated
onto a sheet in the page order. The number of pages per
sheet can be set at [Pages per sheet]. The order can be set
at [Page order].
Booklet
A multiple number of continuous pages are paginated
and printed onto two sides so that a booklet can be
obtained by binding at the centre. Two pages are printed
on each side of paper.
The direction of page order can be set at [Reverse order
(from right to left)] under [Page order] on the [Layout]
tab.
3-14
• If [Booklet] is selected, [Duplex printing] on the
[Main setting] tab is automatically set to [Long
edge binding]. If [Duplex printing] is set to [OFF]
or [Short edge binding], this setting is set to [OFF].
• Any page with no print data becomes blank.
• If [Booklet] of the optional HC Finisher functions is
set to an item other than [OFF], this setting is auto-
matically enabled.
• Printing is performed so that the first page (cover) is
output last.
Fold
A multiple number of continuous pages are paginated
and printed so that a book can be obtained by folding in
two (crosswise) after duplex printing, binding, and cut-
ting. Four pages are printed onto each side of a sheet.
The direction of page order can be set at [Reverse order
(from right to left)] under [Page order] on the [Layout]
tab.
• If [Fold] is selected, [Duplex printing] on the [Main
setting] tab is automatically set to [Long edge bind-
ing]. If [Duplex printing] is set to [OFF] or [Short
edge binding], this setting is set to [OFF].
• Any page with no print data becomes blank.