Riso HC5500 Series User Manual page 99

Image rotation
Sets the orientation of original printing which is in relation to the paper. Auto0 degree90 degrees180 degrees270 degrees can
be selected. If [Auto] is selected, the orientation of printing is automatically selected based on the orientation of the original set
in data, the orientation of the paper set in the feed tray is ready for use.
The initial setting is [Auto].
Depending on the original size and the size and orientation of the paper in the feed tray, rotation of 90 degrees
may be unavailable.
Image position adjustment
Adjusts the print position. The position can be adjusted in the vertical and horizontal directions from 20mm to 20mm (-
13
to + / ") in 0.5mm (0.02") increments. For duplex printing, the position can be adjusted on the front and back sides respectively.
16

13
/ "
16
3-23