Pagination - Riso HC5500 Series User Manual

Pagination

Selects the type of pagination.
~ ~ ~ ~ Settings
OFF (initial setting)
Pagination is not performed.
Multi-up (Single page)
A multiple number of same page are paginated onto a
sheet. The number of pages per sheet can be set at
[Pages per sheet].
Multi-up (Multi-page)
A multiple number of continuous pages are paginated
onto a sheet in the page order. The number of pages per
sheet can be set at [Pages per sheet]. The order can be set
at [Page order].
Booklet
A multiple number of continuous pages are paginated
and printed onto two sides so that a booklet can be
obtained by binding at the centre. Two pages are printed
on each side of paper.
2-14
The direction of page order can be set at [Reverse order
(from right to left)] under [Page order] on the [Layout]
tab.
• If [Booklet] is selected, [Duplex printing] on the
[Main setting] tab is automatically set to [Long
edge binding]. If [Duplex printing] is set to [OFF]
or [Short edge binding], this setting is set to [OFF].
• Any page with no print data becomes blank.
• If [Booklet] of the optional Finisher functions is set
to an item other than [OFF], this setting is automat-
ically enabled.
• Printing is performed so that the first page (cover) is
output last.
Poster print
An original is enlarged, and divided images are printed
onto multiple sheets of paper. By joining these multiple
sheets, you can make a large print such as a poster. Set
the number of divided images at [Divided number].