Table of Contents
Advertisement
fm.book 75 ページ ２００４年７月１３日 火曜日 午後４時５５分
Ejection mode
Selects whether to perform collated printing or non collated printing. The initial setting is [Non collate].
If [Pause after a proof] is enabled, proof copy is printed in the ejection mode specified here.
"Pause after a proof" p.75
Pause after a proof (Proof Copy)
When printing a lot of pages or printing a lot of copies, you can check the print by printing only one page or one set first (not
included in the specified number of copies). After checking, if no problem is found, press the PRINT/PAUSE key on the printer
to continue printing. If adjustment of the print position or anything in relation is required, you can adjust the setting on the printer.
The initial setting is off (no check mark).
If [Ejection mode] is set to [Non collate], proof copy is printed for a page. If [Collate] is set, one set is printed.
"Ejection mode" p.75
"Menu 1 Print Position Adjust" p.33
3
75
Advertisement
Table of Contents
