Output Tray; Offset Output - Riso HC5500 Series User Manual

Output Tray

Selects the tray to which prints are output.
~ ~ ~ ~ Settings
Auto (initial setting)
Outputs paper automatically to a proper tray according
to the setting of Finisher functions.
Normally, set [Auto].

Offset Output

Outputs paper at an offset position for each set when outputting paper to the Stacking Tray.
[Offset output] is a function of the Stacking Tray. This function cannot be used with a function that does not use the Stacking Tray such
as the 2-fold and Booklet functions. The [Job Separation] function on the [Options] tab of the printer driver cannot be used with this
function either.
~ ~ ~ ~ Settings
OFF (initial setting)
Offset output is not performed.
~ ~ ~ ~ Paper that can be used for offset output
Finisher model
HC Finisher
HC Auto Stacker
* 182mm-432mm for staple
Paper weight: 46g/m
4-10
Width
203mm-297mm
131mm-305mm
2 2
- 210g/m (12-lb bond to 56-lb bond) (for cover sheet: 60g/m
Stacking Tray
Select this tray when printing more than 500 sheets
without using any Finisher functions. The paper size that
can be output to the Stacking Tray is 182 mm to 330mm
x 182 mm to 488 mm (7
(for stapling: 203 mm to 297mm x 182 mm to 432 mm
11 3
[8" to 11 / " x 7 /
16 16
If Paper fold or Booklet is set, the Stacking Tray cannot
be selected.
ON
Offset output is performed.
Length
182mm-460mm *
148mm-432mm
2
to 220g/m
3 3 3
/ " to 13" x 7 / " to 19
16 16
" to 17"])
2
[16-lb bond to 58.7-lb bond])
/ ").
16