Main Setting; Colour Mode - Riso HC5500 Series User Manual

Main setting

Switching between colour print and monochrome print, paper type, output method, etc. can be set.
~ ~ ~ ~ Settings

Colour mode

Selects colour or monochrome printing.
Original image
Selects image or character to which priority is given in
printing.
Duplex printing
Selects whether or not to perform duplex printing. If duplex
printing is selected, the binding position can be selected.
Paper feed tray
Selects the feed tray in which paper to be used for printing
is set.
Paper type
Selects the paper type.
Ejection mode
Selects whether to perform collated printing or non collated
printing.
Colour mode
Selects colour or monochrome printing. The initial setting is [Colour].
~ ~ ~ ~ Settings
Colour
The documents are printed with colour (using 4 inks
CMYK).
• If "Monochrome" is selected for printing from a colour original, monochrome printing is performed.
• For colour printing, the original must be created with colour data.
Pause after a proof
Sets whether or not to output proof copy.
Output mode
Selects the output mode of data sent from the computer. The
current setting is displayed below.
Specify output condition
Selects a registered output setting and a storage folder
name.
Default
Returns the settings on the [Main setting] tab to the default
settings.
Help
Displays Help.
Monochrome
The documents are printed with black (using the black
ink only).

3-5