Riso HC5500 Series User Manual page 120

Details of Booklet
If you select an item other than [OFF] at [Booklet] and click the [Details] button, the [Details] screen is displayed.
~ ~ ~ ~ Settings
Separate books
When making a booklet of 16 sheets (61 pages) or more,
the Separate books setting is required.
If [Auto] is selected, for Fold and staple, a booklet is
output every 60 pages (15 sheets).
For only Fold, a booklet is output every 5 sheets (20
pages). If [Setting of number of sheets] is selected, click
or to set the number of sheets that form a booklet.
For Fold and staple
"
(60 pages). For
(20 pages).
The initial setting is [OFF].
• If you perform printing for a document of 16 sheets
(61 pages) or more with [Separate books] set to
[OFF], stapling is not performed and a booklet with
an incorrect page order and fold is created.
• When using [Separate books], you cannot use [Add
cover].
"Add cover" )p.4-3
• If [Auto] is set for a document with 26 sheets (104
pages), pages 1 to 60 (15 sheets) and pages 61 to
104 (11 sheets) are separated.
If you set 13 at [Setting of number of sheets], pages
1 to 52 (13 sheets) and pages 53 to 104 (13 sheets)
are separated.
Centre binding margin
Sets the width of the centre binding margin.
If you click [Put centre binding margin] to place a
checkmark, the binding margin width can be set from 0
mm to 50 mm (0
If you place a checkmark at [Auto reducing], any image
that is not included in the image area because of the mar-
gin width will be automatically reduced so that the
image is included in the image area of the paper.
The initial setting is [OFF].
4-6
, set the number from 1 to 15 sheets
"
Fold , set the number from 1 to 5 sheets
" "
) in 1 mm (0.04 ) increments.
" to 2" "
Print cover separately
Only the covers are printed separately. This function is
useful for printing the covers onto paper different from
paper for the body of a document.
If [Print cover only] is selected, only the pages for cov-
ers (beginning two pages and last two pages of originals)
will be printed. At this time, if you click [Save except
cover in storage] or [Save except cover in archive] to
place a checkmark, the pages other than the covers are
processed with RIP and stored into [Storage] or
[Archive] of [Job manager] of RISO Console. If you
load printed covers in the Cover Sheet Tray and print the
body of the document by recalling from the storage or
archive, you can make booklets.
If you select [Print except cover], pages other than the
covers are printed as booklets.
The initial setting is [OFF].
• If [Print cover only] is selected, prints will not be
folded in two.
• If [Save except cover in archive] is selected, the
security function is not applied to data stored in
"Archive".
"Security print" )p.3-28