Output Mode - Riso HC5500 Series User Manual

Output mode

Selects whether to print data sent from the computer, to store it in the storage or to store it as a form in the printer.
~ ~ ~ ~ Settings
Direct print (initial setting)
Prints data immediately onto paper that is transmitted
from a computer.
Storage
Stores the output data in the printer controller. Data
stored in the storage can be printed repeatedly by select-
ing it on the [Storage] tab of [Job manager] of RISO
Console HC3R.
"Storage"of "HC5500 User's Manual for Console"
)p.1-13
Specify output condition
A stored output setting can be selected. Also the storage folder to which output data is stored can
be specified and a job comment can be input.
Click the [Specify output condition] button to display the [Specify output condition] screen.
~ ~ ~ ~ Settings
Output condition
You can select whether to print according to the printer
driver setting or to print according to output setting
stored in your PC.
When printing according to the printer driver setting,
select [Printer driver setting].
When printing according to setting stored in your PC,
select the desired setting in the pull-down menu and
click the [OK] button.
The initial setting is [Printer driver setting].
• You can store the "Output condition" in your PC by
"Output setting" button.
• If the printer is not connected to a network, "Con-
necting to Server..." is displayed.
Job comment
You can input a comment to be displayed in the
[Details] screen of [Job Manager].
Up to 128 characters can be entered.
) "Forms" of "HC5500 User's Manual for Console"
Print & Storage
Performs direct printing and also stores the output data
in the printer controller (Storage).
Storage folder name
Output data can be stored in any folder created in the
printer.
If [Print & Storage] or [Storage] is selected at [Output
mode] and folders are created in the printer, select one of
folder1 - folder9 (or any registered foldername that has
been set).
Select the desired folder in the pull-down menu and
click the [OK] button.
The initial setting is [Folder 0].
If the printer is not connected to a network, "Connect-
ing to server..." is displayed.

2-9