Riso HC5500 Series User Manual page 100

Image quality
Sets the image quality (resolution). Standard (300dpi x 300dpi) or Fine (300dpi x 600dpi) can be selected. The initial setting is
[Standard (300dpi x 300dpi)].
Auto colour matching
Selects whether or not to use HC5500 Series original colour management (ComColor
sion).
Normally, check this item (colour management is enabled).
If colour management is not required, clear the check mark. In this case, colour management depends on the setting of application
that is used for creating output data. Also if the check mark is cleared, [Maximum drops] can be set manually.
If [Maximum drops] is set to [Auto], the number of drops adequate for the paper type is automatically set. Nor-
mally, use this function with [Auto].
~ ~ ~ ~ Settings of Maximum drops
Auto
1
2
3
4
5
6
7
When printing data created with CMYK, clear the check mark.
If the check mark is not cleared, when data created with CMYK in application software is printed, colour adjustment (conversion)
is performed and colours different from the created data are used for printing.
3-24
Adjusts automatically the colours.
Few
(5 is standard)
Many
™
Standard) for colour adjustment (conver-