Paper Feed Tray; Paper Type - Riso HC5500 Series User Manual

Paper feed tray

Selects the paper feed tray in which paper to be used for printing is loaded.
~ ~ ~ ~ Settings
Auto tray selection
The paper feed tray is automatically selected according
to the settings of [Paper type] on the [Main setting] tab
and [Output paper size] on the [Layout] tab.
Feed Tray 1
Printing is performed onto the paper loaded in Paper
Feed Tray 1.
Feed Tray 2
Printing is performed onto the paper loaded in Paper
Feed Tray 2.

Paper type

Selects the paper type. In printing, ink quantity adjustment and image processing adequate for the selected paper type are per-
formed.
~ ~ ~ ~ Selectable paper types
• Standard 1
• High-Quality 1
• High-Quality 2
• Envelope
• Card Stock
• Card-IJ
• If the selected paper type is different from the paper types set for the feed trays and the Standard Feed
Tray and [Tray Selection Rule] of the menu setting of the printer is set to [Size & Type], an error occurs
and printing cannot be performed. The paper types of the feed trays and the Standard Feed Tray are set
on the Operation Panel of the printer.
"Menu4 Configuration" of "HC5500 User's Manual for Printer Main Body" )p.2-18)
"Menu5 Administration" of "HC5500 User's Manual for Printer Main Body" )p.2-31)
• If the relevant paper type is not included in the list, specify the equivalent type. When not specified, no-
paper error occurs and printing cannot be performed.
• Selectable paper types depend on the setting of [Paper category] on the [Environment] tab.
"Environment" )p.3-35
• When printing onto an envelope, be sure to set [Paper type] to [Envelope]. If a different paper type is set,
an envelope may jam in the printer or the print head may be damaged.
Standard Feed Tray
Printing is performed onto the paper loaded in the Stan-
dard Paper Feed Tray.
• If Feed Tray 1/ Feed Tray 2/ Standard Feed Tray is
selected, printing is performed onto the paper
loaded in the selected paper feed tray regardless of
the settings of [Paper type] on the [Main setting] tab
and [Output paper size] on the [Layout] tab.
• If no specific feed tray meets the condition set at
[Tray Selection Rule], an error will occur and there-
fore printing cannot be performed. Check the set-
ting in the menu setting of the printer.

3-7