Output Mode - Riso HC5500 Series User Manual

Output mode

Selects whether to print data sent from the computer, to store it in the storage or to store it as a form in the printer controller.
~ ~ ~ ~ Settings
Direct print (initial setting)
Prints data immediately onto paper that is transmitted
from a computer.
Archive
Output data that is processed with RIP is stored
(archived) in the printer controller.
The stored data can be selected on the [Archive] tab in
[Job manager] of RISO Console PS7R for repeated
printing.
Since the data is processed with RIP, the output condi-
tions cannot be changed but the data can be printed in a
shorter time than "Direct print" or "Storage."
"Archive" of "HC5500 User's Manual for Console"
)p.1-11
Output to "Archive" and the Security print cannot be
used together at the same time. )p.3-28
If HC5500 is used as a network printer, the Security
print cannot be set for data that will be stored into
"Archive."
Consequently, data stored into "Archive" can be
accessed freely by users through RISO Console. It is
recommended not to output (store) secret documents
into "Archive."
Consequently, note that if an HC Finisher is connected
and "Save except cover in archive" of the "Booklet"
function is selected, the security function is not applied
to data stored in "Archive."
Storage
Stores the output data in the printer controller. Data
stored in the storage can be printed repeatedly by select-
ing it on the [Storage] tab of [Job manager] of RISO
Console PS7R.
"Storage"of "HC5500 User's Manual for Console"
)p.1-13
Print & Storage
Performs direct printing and also stores the output data
in the printer controller (Storage).
Form
Stores the output data as a form in the printer controller.
The stored form can be selected on the [Forms] tab and
be overlaid on other output data for printing.
Output data created by overlay with a form cannot be
stored in the storage.
"Forms"of "HC5500 User's Manual for Console" )p.1-
15

3-9