Riso HC5000T Instruction Manual
  1. Manuals
  2. Brands
  3. Riso Manuals
  4. Printer
  5. HC5000T
  6. Instruction manual
Riso HC5000T Instruction Manual

Riso HC5000T Instruction Manual

Hide thumbs Also See for HC5000T:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
fm.book i ページ ２００４年７月１３日　火曜日　午後４時５５分
Notice about the law and the standard
High Speed Colour Printer
Model: HC5000T
This product contains RFID (Radio Frequency Identification) system.
Model: 444-59003
Contains FCC ID:RPARFMHL00
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The user is cautioned that unauthorised changes or modifications not approved could the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Contains Canada IC:4819A-RFMHL00
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Countries of intended use
Austria/Belgium/Denmark/Finland/France/Germany/Greece/Iceland/Ireland/Italy/Luxembourg/Netherlands/Norway/Portugal/
Spain/Sweden/Switzerland/U.K.
Copyright © 2004 RISO KAGAKU CORPORATION
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HC5000T and is the answer not in the manual?

Questions and answers

Related Manuals for Riso HC5000T

Summary of Contents for Riso HC5000T

  • Page 1 This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Countries of intended use Austria/Belgium/Denmark/Finland/France/Germany/Greece/Iceland/Ireland/Italy/Luxembourg/Netherlands/Norway/Portugal/ Spain/Sweden/Switzerland/U.K. Copyright © 2004 RISO KAGAKU CORPORATION...
  • Page 2 As we are constantly improving our products, the machine may differ in some respects from the illustrations used in this manual. Riso shall not be liable for any direct, incidental, or consequential damages of any nature, or losses or expenses resulting from the use of this product or included manuals.

  • Page 3: How To Read This Manual

    Be sure to read these items before using this machine. Notation of Number of Sheets of Paper In this manual, dedicated paper (RISO Paper IJ 85g / m (22.6-lb bond)) is used as a standard for description.

  • Page 4: Safety Precautions

    fm.book iv ページ ２００４年７月１３日　火曜日　午後４時５５分 Safety Precautions This section describes the items that should be followed for safe use of this machine. Be sure to read this section. Warning Symbols To use the machine properly and to prevent human injury and damage to properties, the following warning symbols are used. Read the meaning of the symbols to understand and then read this manual.
  • Page 5 fm.book v ページ ２００４年７月１３日　火曜日　午後４時５５分 Handling WARNING Do not place water containers or metallic objects on the machine. If water drips inside the machine or a metallic object drops inside it, a fire or an electric shock might occur. Do not insert or drop any metallic material or flammable substances into the machine through any opening. A fire or an electric shock might occur.

  • Page 6: Operation Environment

    fm.book vi ページ ２００４年７月１３日　火曜日　午後４時５５分 Before Starting to Use This section explains precautions you have to observe when using the machine. Location for Installation The location for installation is determined based on consultation with the customer at the time of delivery. Contact your service representative before moving the machine.
  • Page 7 fm.book vii ページ ２００４年７月１３日　火曜日　午後４時５５分 Handling of The Machine Do not turn off the Main Power Switch or unplug the electrical (power) cord during operation. Do not open any covers during operation. Do not move the machine. The machine has precision parts and driving parts inside. Do not handle the machine in other ways than described in this manual.
  • Page 8 fm.book viii ページ ２００４年７月１３日　火曜日　午後４時５５分 Disposal of Ink Cartridge and Ink Drain Tank The ink may leak through the ink feed opening of the cartridge. When returning, attach the cap and put the cartridge into the inner bag and the packing material. Used Ink Cartridges and Ink Drain Tanks are collected by a service representative.

  • Page 9: Materials Not To Be Printed

    fm.book ix ページ ２００４年７月１３日　火曜日　午後４時５５分 Maximum Print Area (Image Area) Although printing can be performed into the area inside 1 mm (0.04") from the sides of paper, deterioration of print quality such as loss of characters or figures and bleeding may occur depending on the original. Even if the paper size is larger than 316mm ×...

  • Page 10: Connecting To A Computer

    fm.book x ページ ２００４年７月１３日　火曜日　午後４時５５分 Connecting to a Computer The machine is connected to a computer through network. When connecting the machine to multiple computers: When connecting the machine to a single computer: • Use a commercially available S/UTP cable (shielded or non-shielded twisted pair cable) as a LAN cable. A cable for 10BASE-T or 100BASE-TX can be used.

  • Page 11: Table Of Contents

    fm.book xi ページ ２００４年７月１３日　火曜日　午後４時５５分 Contents Chapter1 Basic Information on Printing ....1 Describes names and functions of parts of the printer, preparation for printing, and general printing operation.
  • Page 12 fm.book xii ページ ２００４年７月１３日　火曜日　午後４時５５分 5.5 Head Maintenance ............58 5.6 Configuration Information Print .
  • Page 13 Others ..............116 Chapter5 Printer Monitoring (Console) ... . . 119 Describes "RISO Console PS7R" that allows the printer operation status to be checked through Web browser.
  • Page 14 fm.book xiv ページ ２００４年７月１３日　火曜日　午後４時５５分 Chapter6 Printer Administration (Console) ..139 Describes the method of setting the print controller built in the printer. What is Administrator Setting? ......... .140 Administrator .

  • Page 15: Chapter1 Basic Information On Printing

    fm.book 1 ページ ２００４年７月１３日　火曜日　午後４時５５分 Chapter1 Basic Information on Printing This section describes names and operation of parts that should be known for using the printer and general printing operation.

  • Page 16: Names Of Parts

    fm.book 2 ページ ２００４年７月１３日　火曜日　午後４時５５分 Names of Parts Printer Main Body...
  • Page 17 fm.book 3 ページ ２００４年７月１３日　火曜日　午後４時５５分...

  • Page 18: Main Body (Rear View)

    fm.book 4 ページ ２００４年７月１３日　火曜日　午後４時５５分 Main Body (rear view) Stack Guide Open Button When removing printed paper from the Paper Receiving Tray, press this button to spread the Stack Guides for easy removal. The guides to be spread can be set. For details, refer to "4.8.4 Shifting Guide"...

  • Page 19: Control Panel

    fm.book 5 ページ ２００４年７月１３日　火曜日　午後４時５５分 Control Panel The Control Panel includes a message display, setting and trouble display, and operation keys. For description of each display and detailed operation methods, refer to "Chapter 2 Printer Configuration" p.21.

  • Page 20: Preparing To Print

    fm.book 6 ページ ２００４年７月１３日　火曜日　午後４時５５分 Preparing to Print After connection of the printer to a computer or network is complete, prepare paper and the Paper Receiving Tray for printing. Usable Paper This section describes usable paper and unusable paper. Use of paper that is not adequate for the printer may cause paper jams, stains or a failure. Use paper that conforms to the following specifications.
  • Page 21 fm.book 7 ページ ２００４年７月１３日　火曜日　午後４時５５分 Paper Sizes That Can Be Used in Paper Feed Tray 1 / Paper Feed Tray 2 Registering Paper Size and Paper Type If non-standard size paper is used in Feed Tray 1/Feed Tray 2, the paper size and the paper type must be registered in advance. "5.1 Paper Size Entry"...
  • Page 22 fm.book 8 ページ ２００４年７月１３日　火曜日　午後４時５５分 Handling of Paper • For printing paper, use recommended paper wherever possible. Recommended paper allows high-quality printing that makes full use of the printer performance and the characteristics of ink. • When loading paper in the Standard Feed Tray, be sure to use paper that has not been unpacked. After completing printing, store paper left in the Standard Feed Tray by wrapping it with packing paper.

  • Page 23: Power Switch

    fm.book 9 ページ ２００４年７月１３日　火曜日　午後４時５５分 Power Switch This unit has two power switches. Main Power Switch and Power Key The Main Power Switch is used to turn on or off the whole printer. If the printer is not used for a long time, for example due to consecutive holidays, turn off the Main Power Switch.

  • Page 24: Loading Paper

    The number of sheets * that can be loaded in the Feed Trays and the Paper Feed Tray are shown below. The number of sheets that can be loaded varies with the thickness of paper. * When RISO Paper IJ (85g / m (22.6-lb bond)) is used:...

  • Page 25: Paper Size

    fm.book 11 ページ ２００４年７月１３日　火曜日　午後４時５５分 Loading Paper (Paper Feed Tray 1 / Paper Feed Tray 2) Pull out the Paper Feed Tray until it While pressing the release buttons, insert the Paper Top Guide by adjusting the mark of the Paper stops.
  • Page 26 fm.book 12 ページ ２００４年７月１３日　火曜日　午後４時５５分 Adjust the guides to the paper size. In the menu setting, set the size, paper type, and double feed check. Slide the guides to adjust to the paper width and turn down the Side Guide Locking Levers to the "LOCK" Use "4.2 Feed Tray 1"...
  • Page 27 Paper quality Supported printing paper (NORMAL)] Standard or Thin/Light • Fine • RISO PAPER IJ • RISO PAPER IJ MATTE • Commercially available copy paper • Official postcard • Official postcard for ink jet printer (CARD)] Card or Special • Drawing paper...
  • Page 28 fm.book 14 ページ ２００４年７月１３日　火曜日　午後４時５５分 When Adding or Replacing Paper in the Standard Feed Tray When adding paper of the same size or replacing it with paper of a different size, use the Feed Tray Descent button. If all sheets of paper is removed from the Standard Feed Tray, the tray lowers automatically. Press the Feed Tray Descent Button Add or replace the paper.

  • Page 29: Setting Up The Paper Receiving Tray

    fm.book 15 ページ ２００４年７月１３日　火曜日　午後４時５５分 Setting Up the Paper Receiving Tray Set the Paper Receiving Tray. Adjusting the Side Guides and Rear Guide Positions The Side Guides and the Rear Guide move automatically to the optimum positions according to the printing paper size. Fine position adjustment can be performed on the Control Panel.
  • Page 30 fm.book 16 ページ ２００４年７月１３日　火曜日　午後４時５５分 How to Close the Paper Receiving Tray Close the Paper Receiving Tray as described below. Check that no print remains and press Turn down the Stack Guide (Side) the [Stack Guide Open Button]. inward and fold them. The Stack Guide (side) and the Stack Guide (End) move to their storage positions.

  • Page 31: Basic Printing Operation

    fm.book 17 ページ ２００４年７月１３日　火曜日　午後４時５５分 Basic Printing Operation After connection and preparation are complete, perform trial printing. This section describes the basic operation method of “Direct Printing”, namely printing data created in the computer without storing data in the printer. • Required software must be installed in the computer in advance. For details, refer to the separate "HC5000 Series Installation Manual."...
  • Page 32 18 ページ ２００４年７月１３日　火曜日　午後４時５５分 Select [Print] from the [File] menu. Check that "RISO HC5000" is selected in [Printer name]. As the printer name, select the name set when the printer driver was installed. Check the following items. If you click the [Properties] button, you can set the various conditions on the printer driver screen. The set- tings of [Original image] on the [Main setting] tab and [Paper type] on the [Layout] tab affect seriously the print quality.
  • Page 33 fm.book 19 ページ ２００４年７月１３日　火曜日　午後４時５５分 Click the [OK] button. When the printer receives data sent from the computer, the DATA indicator blinks and message "Receiving Data" is dis- played on the Display. When reception is complete, the DATA indicator lights up, message "Printing" is displayed, and printing starts.
  • Page 34 fm.book 20 ページ ２００４年７月１３日　火曜日　午後４時５５分...

  • Page 35: Chapter2 Printer Configuration

    fm.book 21 ページ ２００４年７月１３日　火曜日　午後４時５５分 Chapter2 Printer Configuration This chapter describes the status of the Operation Panel that is displayed during printing. Also this chapter describes the method of setting the printer using the Operation Panel. After sending data to the printer, you can adjust the print position and perform test printing.

  • Page 36: Message Display And Operation Keys

    fm.book 22 ページ ２００４年７月１３日　火曜日　午後４時５５分 Message Display and Operation Keys This section describes the meaning of each display in the Message Display and operation keys. Message Display In the Message Display, a message indicating printer operation status is displayed. Principal display items and locations are shown below.
  • Page 37 fm.book 23 ページ ２００４年７月１３日　火曜日　午後４時５５分 When an Error Occurs When an error occurs, an error number and its description are displayed in the Message Display. For error numbers, refer to "Chapter 4 Troubleshooting" p.97. Status The status of the printer is displayed. The following messages are displayed. Message Meaning Please Wait a Moment...

  • Page 38: Operation Keys

    fm.book 24 ページ ２００４年７月１３日　火曜日　午後４時５５分 Operation Keys The functions of the keys are shown below. One key may have more than one function. PRINT/PAUSE Key • Turns on or off the Printing mode. When the Printing mode is on, the indicator is lit, and when the Printing mode is off, the indi- cator is not lit.

  • Page 39: How To Use The Operation Panel

    fm.book 25 ページ ２００４年７月１３日　火曜日　午後４時５５分 How to Use the Operation Panel You can set or change the printer environment such as print position and paper type registration using the MENU Key of the Oper- ation Panel. Items That Can Be Set from the Menu The item that can be set from the menu and the details of each setting are shown below.
  • Page 40 fm.book 26 ページ ２００４年７月１３日　火曜日　午後４時５５分 Item Details of setting (range) Refer- ence 4.4 Feed Tray Relay p.40 Sets whether or not to feed paper continuously by changing automatically the feed trays. 4.5 Triple-Tray Source p.41 Sets whether or not the Standard Feed Tray is selected in automatic tray selection.
  • Page 41 fm.book 27 ページ ２００４年７月１３日　火曜日　午後４時５５分 Item Details of setting (range) Refer- ence 5.3 Separation Paper p.54 Sets the feed tray for job separation paper. Standard Feed Tray Feed Tray 1 Feed Tray 2 5.4 Count Management p.55 Displays the number of printed sheets. −...
  • Page 42 fm.book 28 ページ ２００４年７月１３日　火曜日　午後４時５５分 Item Details of setting (range) Refer- ence 5.8.7 Displayed Language * Japanese/UK English/US English/French/German/Ital- Sets the language to be displayed in the ian/Spanish Operation Panel. 5.8.8 Metric/Inch Switch Sets the unit of length displayed in the inch Operation Panel.

  • Page 43: Basic Operation Of Menu Selection

    fm.book 29 ページ ２００４年７月１３日　火曜日　午後４時５５分 Basic Operation of Menu Selection How to Enter the Menu Set the menu when the printer is not operating, for example, when printing is suspended or the printer is waiting for data. To perform setting when the printer is printing, press the PRINT/PAUSE key to suspend printing (turn off the Printing mode) and press the MENU Key.
  • Page 44 fm.book 30 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu Selection The menu has a tree-type hierarchical structure. Press the key to display the desired menu. Submenu Menu4 “The Configuration” and Menu5 “Administration” include submenus. If you press the OK Key when a menu is displayed, its submenu will be displayed. In some menus, the submenu has multiple levels.
  • Page 45 fm.book 31 ページ ２００４年７月１３日　火曜日　午後４時５５分 To display "4.1.1 Paper Size", operate as follows. The menu hierarchy is listed at the end of this manual. Refer also to the list.
  • Page 46 fm.book 32 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu Setting Select the desired menu and press the OK Key. Menu setting can be performed. Press the key to select the desired item and press the OK Key. Suspending the Operation To return to the upper level from a submenu, press the CANCEL/ BACK Key. To cancel and exit the setting, press the MENU Key.

  • Page 47: Menu 1 Print Position Adjust

    fm.book 33 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 1 Print Position Adjust Adjusts the print position. Also the positions can be adjusted for punching and stapling after printing. Adjustable Range If you want to shift the print position after checking the printed sheet, use the Cursor Keys on the printer to shift the position. •...
  • Page 48 fm.book 34 ページ ２００４年７月１３日　火曜日　午後４時５５分 Press the MENU Key. Check that "Print Position Adj" is dis- played. Press the OK Key. Press the keys to adjust the print position. Only the arrow that corresponds to the pressed key is dis- played and the relevant value changes. After setting is complete, press the OK Key.

  • Page 49: Menu 2 Test Print

    fm.book 35 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 2 Test Print Prints the data currently retained in the printer for checking. Use this function to check to see if the settings such as print position and density adjustments are reflected properly. • The number of printed sheets with the Test Print function is not counted as the "Number of Copies" that is set on a computer. •...

  • Page 50: Menu 3 Temp Data Retrieve

    fm.book 36 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 3 Temp Data Retrieve The data currently retained in the printer can be retrieved and printed again by specifying the number of copies (additional printing). The Temporary Data Retrieve function can be used if "5.8.6 Temp Data Retention" of the menu setting is set to "ON."...

  • Page 51: Menu 4 Configuration

    fm.book 37 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 4 Configuration Functions concerning printing such as size and type of paper to be loaded in the feed trays and the Job Separation function can be set. Functions The functions that can be set are shown below. 4.1 Standard Feed Tray 4.2 Feed Tray 1 4.3 Feed Tray 2...

  • Page 52: Standard Feed Tray/ 4.2 Feed Tray 1/ 4.3 Feed Tray 2

    fm.book 38 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.1 Standard Feed Tray/ 4.2 Feed Tray 1/ 4.3 Feed Tray 2 Set the size and type of paper to be loaded in the Standard Paper Feed Tray and the other Paper Feed Trays and turn on or off the Double Feed Check function.
  • Page 53 fm.book 39 ページ ２００４年７月１３日　火曜日　午後４時５５分 Paper Size • To use non-standard size paper, register the size to be used in "5.1 Paper Size Entry" of the menu setting in advance. After the size is registered, paper of the size can be used. •...

  • Page 54: Feed Tray Relay

    fm.book 40 ページ ２００４年７月１３日　火曜日　午後４時５５分 Double Feed Check Press the key to display Press the key to select ON "Double Feed Check." or OFF. Press the OK Key. Press the OK Key. When the screen in step 1 reappears, you can continue setting.

  • Page 55: Triple-Tray Source

    fm.book 41 ページ ２００４年７月１３日　火曜日　午後４時５５分 Press the key to select ON Press the OK Key. or OFF. When the screen in step 4 reappears, you can continue setting. To exit the setting, press the PRINT/PAUSE key. 4.5 Triple-Tray Source Sets whether or not to include the Standard Feed Tray into feed trays for selection when "Auto tray selection" is selected in "Paper feed tray"...

  • Page 56: Job Separation

    fm.book 42 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.6 Job Separation The setting of Job separation (set with the printer driver) can be changed while printing of the current job is performed. Settings Job Separation is not performed. Between Jobs Separation paper is inserted between jobs. Every Division Separation paper is inserted every division.

  • Page 57: Print Density

    fm.book 43 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.7 Print Density You can manually change the print density. The density of overall printing is set. To adjust specific colours or to change the halftone reproduction method, use the "Image processing" tab of the printer driver to adjust or process the image using the application software. Settings Density-Level 5 Dark...

  • Page 58: Paper Ejection

    fm.book 44 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.8 Paper Ejection Sets the position and adjustment of the Eject Wing of the Auto Stacking Tray and the Stack Guides. Settings 4.8.1 Adjusts the Eject Wing so that the shape changes for proper paper arrangement when printed paper Eject Wing is ejected.
  • Page 59 fm.book 45 ページ ２００４年７月１３日　火曜日　午後４時５５分 Press the MENU Key. Press the key to display "Paper Ejection." Press the key to display "Configuration." Press the OK Key. The submenu of "Paper Ejection" is displayed. Press the OK Key. 4.8.1 Eject Wing Ensure that "Eject Wing" is displayed. Press the key to select.
  • Page 60 fm.book 46 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.8.3 Stack Guide Adjust Press the key to display To adjust the Side Guide positions, "Stack Guide Adjust." press the key, and to adjust the End Guide position, press key. Only the arrow that corresponds to the pressed key is displayed therefore the relevant value changes.

  • Page 61: Temp Data Clear

    fm.book 47 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.9 Temp Data Clear If "5.8.6 Temp Data Retention" of the menu setting is set to "ON," the printer retains the data of the last page (last sheet for duplex printing) of the latest printing as temporary data. If you do not want to leave the temporary data in the printer because of confi- dential documents or anything to that matter, use this function to clear it.

  • Page 62: Image Area (Maximum Print Area)

    fm.book 48 ページ ２００４年７月１３日　火曜日　午後４時５５分 4.10 Image Area (Maximum Print Area) With this machine, a certain area of space is left along the edges of paper regardless of the original size. Normally, use the setting "Standard." If the image is larger than the printable area, the relevant part of the image is not printed. (Reduction is not per- formed.) Settings Standard...

  • Page 63: Menu 5 Administration

    fm.book 49 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 5 Administration Sets basic information of the printer such as paper type entry, maintenance, and initial setting. The items set here are effective until the setting is changed regardless of when the power is on or off. Functions The functions that can be set are shown below.

  • Page 64: Paper Size Entry

    fm.book 50 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.1 Paper Size Entry Five non-standard paper sizes can be registered. When using non-standard size paper, be sure to register the size in advance. Registered values are displayed in Paper Size of "4.1.1 Standard Feed Tray," "4.2.1 Feed Tray 1," and "4.3.1 Feed Tray 2." If the paper sizes have been registered, the registered values will be displayed.

  • Page 65: Paper Type Entry

    fm.book 51 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.2 Paper Type Entry If any paper other than printer recommended paper is used or paper is not fed properly, it could result in poor print quality. You should register the paper type and feeding according to the paper type specifications. The registered setting is displayed in Paper Type of "4.1.2 Standard Feed Tray,"...
  • Page 66 fm.book 52 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.2.1 Registering a New Paper Type Use steps 1 - 4 ( p.49) to display Press the OK Key. "Administration." The screen in step 6 appears again. Press the key to display "Paper Type Entry." Set the Paper Type. Press the key to display "Paper Type."...
  • Page 67 fm.book 53 ページ ２００４年７月１３日　火曜日　午後４時５５分 Press the key to select the Press the OK Key. desired paper type. The screen in step 13 reappears, you can continue set- ting. To exit the setting, press the PRINT/PAUSE key. Standard Paper 1/ High-Quality 1/ High-Quality 2 Use steps 1 - 4 ( p.49) to display Press the key to select the...

  • Page 68: Separation Paper

    fm.book 54 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.3 Separation Paper If you use "4.6 Job Separation", specify the feed tray in which the separation paper is loaded. Settings The separation paper can be used even if the size and the orientation are different from those of the printer paper. The separation paper tray is not specified.

  • Page 69: Count Management

    fm.book 55 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.4 Count Management The number of printed sheets can be checked. • The number of sheets that have been ejected in the Paper Receiving Tray is displayed. • In duplex printing, each side is counted, and therefore one sheet of both sides is counted by two. Settings 5.4.1 The total number of sheets that have been printed until now is displayed.
  • Page 70 fm.book 56 ページ ２００４年７月１３日　火曜日　午後４時５５分 Count No. Paper Size Number Simplex/ Duplex Colour/ Monochrome Size No.1 Size No.2 Size No.3 Size No.4 Simplex Size No.5 Size No.6 Size No.7 Monochrome Size No.1 Size No.2 Size No.3 Size No.4 Duplex Size No.5 Size No.6 Size No.7 5.4.1 Copy Count...
  • Page 71 fm.book 57 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.4.3 Count Pattern Use steps 1 - 4 ( p.49) to display "Administration." Press the key to display "Count Management." Press the OK Key. Press the key to display "Count Pattern." Press the OK Key. Press the keys to move the cur- sor, and press the keys to...

  • Page 72: Head Maintenance

    fm.book 58 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.5 Head Maintenance Perform maintenance of the print head section. You can also set the cycle of automatic cleaning. Use this function when there is a problem of image quality. For example, if parts of print images are blurred, white lines appear, a specific colour is light and when the printer will not be used or has not been used for a long time.
  • Page 73 fm.book 59 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.5.3 Normal Cleaning Use steps 1 - 4 ( p.49) to display Press the OK Key. "Administration." After checking the message, press Press the key to display the OK Key. "Head Maintenance." When message "Cleaning Print Head-K" blinks, cleaning is performed.

  • Page 74: Configuration Information Print

    fm.book 60 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.6 Configuration Information Print Configuration settings are printed in a list. Information such as current printer settings, available memory capacity, and a version of the system can be checked. Restrictions in configuration information print • Perform configuration information print when printing is not being performed, for exammple, when "Ready" is displayed. •...

  • Page 75: Network Configuration

    fm.book 61 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.7 Network Configuration If the printer is connected to a network, register the IP address, subnet mask, and default gateway. The settings will be effective after the power is turned off and then on again. For details, consult your network administrator. Settings DHCP ON The settings of the IP address, subnet mask, and default gateway of the printer controller are used and...

  • Page 76: Initial Setting

    fm.book 62 ページ ２００４年７月１３日　火曜日　午後４時５５分 After checking the message, press After message "Shutting Down" disappears and the Power Key becomes orange, press the Power Key the OK Key. again to turn ON the power. Message "Registered. Restart Printer" is displayed. Press the power Key to turn off the power and then on again.
  • Page 77 fm.book 63 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.8.1 Sleep Use steps 1 - 4 ( p.49) to display Press the OK Key. "Administration." Press the key to select ON Press the key to display or OFF. "Initial Setting." Press the OK Key. Press the OK Key. When the screen in step 4 reappears, you can continue setting.
  • Page 78 fm.book 64 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.8.3 Beep Sound -Key Use steps 1 - 4 ( p.49) to display Press the key to select ON "Administration." or OFF. Press the key to display "Beep Sound -Key." Press the OK Key. When the screen in step 2 reappears, you can continue setting.
  • Page 79 fm.book 65 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.8.5 Beep Sound -Error Use steps 1 - 4 ( p.49) to display Press the key to select ON "Administration." or OFF. Press the key to display "Beep Sound -Error." Press the OK Key. When the screen in step 2 reappears, you can continue setting.
  • Page 80 fm.book 66 ページ ２００４年７月１３日　火曜日　午後４時５５分 5.8.8 Metric/Inch Switch Use steps 1 - 4 ( p.49) to display "Administration." Press the key to display "Metric/Inch Switch." Press the OK Key. Press the key to select the unit. Press the OK Key. When the screen in step 2 reappears, you can continue setting.

  • Page 81: Menu 6 Feed Tray Selection

    fm.book 67 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 6 Feed Tray Selection If the paper conditions of data received from a computer do not match those of any of the Standard Feed Tray and other feed trays, printing will not start. In this case, you can specify the Standard Feed Tray or another feed tray where the printer paper is set and start printing with no trouble.

  • Page 82: Menu 7 Job Clear

    fm.book 68 ページ ２００４年７月１３日　火曜日　午後４時５５分 Menu 7 Job Clear Cancels the currently printed job and clears the data. What is Job? When data is transmitted from a computer to the printer, the controller in the printer processes the data and sends the print data to the FORCE- ™...

  • Page 83: Chapter3 Printer Driver Operation

    fm.book 69 ページ ２００４年７月１３日　火曜日　午後４時５５分 Chapter3 Printer Driver Operation For printing according to your personal specifications and use, you must adjust the printer driver settings. This chapter describes the settings of the printer driver.

  • Page 84: Items That Can Be Performed With Printer Driver

    fm.book 70 ページ ２００４年７月１３日　火曜日　午後４時５５分 Items That Can Be Performed with Printer Driver This section describes the settings of the printer driver. Description of Screen The driver setting screen consists of the following seven tabs. (The screen of a Windows computer is used as an example here.) [Main setting] tab Switching between colour and monochrome, paper type, output method, etc.
  • Page 85 fm.book 71 ページ ２００４年７月１３日　火曜日　午後４時５５分 [Options] tab Method of job separation, print density, and clustering can be set. "Options" p.89 [Forms] tab A form registered in the printer can be overlaid on output data for printing. "Forms" p.92 [Advanced] tab The PostScript printer driver setting screen is displayed. Use with the default settings is recommended.

  • Page 86: Main Setting

    fm.book 72 ページ ２００４年７月１３日　火曜日　午後４時５５分 Main setting Switching between colour print and monochrome print, paper type, output method, etc. can be set. Settings Colour mode Pause after a proof Selects colour or monochrome printing. Sets whether or not to output proof copy. Original image Output mode Selects image or character to which priority is given in...

  • Page 87: Original Image

    fm.book 73 ページ ２００４年７月１３日　火曜日　午後４時５５分 Original image Selects line or photo to which priority is given in printing. The optimum colour management is obtained according to the selected mode. The initial setting is [Photo-based]. Settings Line-based Photo-based Characters and illustrations are clearly printed. Images such as photos are printed with natural colour tone.

  • Page 88: Paper Feed Tray

    fm.book 74 ページ ２００４年７月１３日　火曜日　午後４時５５分 Paper feed tray Selects the paper feed tray in which paper to be used for printing is loaded. Settings Auto tray selection Feed Tray 2 The paper feed tray is automatically selected according Printing is performed onto the paper loaded in Paper to the settings of [Paper type] on the [Main setting] tab Feed Tray 2.

  • Page 89: Ejection Mode

    fm.book 75 ページ ２００４年７月１３日　火曜日　午後４時５５分 Ejection mode Selects whether to perform collated printing or non collated printing. The initial setting is [Non collate]. If [Pause after a proof] is enabled, proof copy is printed in the ejection mode specified here. "Pause after a proof" p.75 Pause after a proof (Proof Copy) When printing a lot of pages or printing a lot of copies, you can check the print by printing only one page or one set first (not included in the specified number of copies).

  • Page 90: Output Mode

    Stores the output data as a form in the printer. The stored storage can be printed repeatedly by selecting it on the form can be selected on the [Forms] tab and be overlaid [Storage] tab of [Job manager] of RISO Console PS7R. on other output data for printing. "Storage"...

  • Page 91: Layout

    fm.book 77 ページ ２００４年７月１３日　火曜日　午後４時５５分 Layout Sets the enlargement/reduction ratio in printing and the method of pagination. Settings Original size Pages per sheet Selects the paper size specified with the application soft- Selects the number of pages per sheet for pagination. ware.

  • Page 92: Output Paper Size

    fm.book 78 ページ ２００４年７月１３日　火曜日　午後４時５５分 Output paper size Selects the paper size for printing. The initial setting is [Same as original]. The following paper sizes can be selected. Same as original/ A3W / A3 / A4 / B4 / B5 / B6 / Postcard / Foolscap / Legal / Letter / Tabloid / Statement / Custom If the original size is different from the output paper size, enlargement/reduction is automatically performed according to the out- put paper size.

  • Page 93: Pagination

    fm.book 79 ページ ２００４年７月１３日　火曜日　午後４時５５分 Pagination Selects the type of pagination. Settings OFF (initial setting) • If [Booklet] is selected, [Duplex printing] on the Pagination is not performed. [Main setting] tab is automatically set to [Long edge binding]. If [Duplex printing] is set to [OFF] Multi-up (Single page) or [Short edge binding], this setting is set to [OFF].
  • Page 94 fm.book 80 ページ ２００４年７月１３日　火曜日　午後４時５５分...

  • Page 95: Pages Per Sheet

    fm.book 81 ページ ２００４年７月１３日　火曜日　午後４時５５分 Pages per sheet If [Multi-up (Single page)] or [Multi-up (Multi-page)] is selected at [Pagination], set the number of pages per sheet for pagination. Any of 2, 4, 8, and 16 pages/ sheet can be selected. The initial setting is 2 pages. If [Booklet] or [Fold] is selected at [Pagination], the number of pages per sheet need not be selected.

  • Page 96: Image Processing

    fm.book 82 ページ ２００４年７月１３日　火曜日　午後４時５５分 Image processing Specifies print quality for image materials such as photo. Settings Gamma control Special image setting Adjusts the Gamma values of contrast, density and CMYK. Sets the orientation of the original, print position, image quality, etc. Screening Selects the method of half-tone processing.
  • Page 97 fm.book 83 ページ ２００４年７月１３日　火曜日　午後４時５５分 Settings Contrast Adjust the contrast (correlation between brightness and darkness) of images among five levels. High contrast increases the difference between bright areas and dark areas, resulting in sharper images. Low contrast decreases the difference between the brightness and darkness, resulting in greyish images on the overall area.

  • Page 98: Screening

    fm.book 84 ページ ２００４年７月１３日　火曜日　午後４時５５分 Screening Sets the half-tone processing method and enables/disables line smoothing. What is Half Tone? Half tone is a method of processing for expressing continuous colour tones with the limited number of ink types by changing the density and size of ink discharged onto sheet.
  • Page 99 fm.book 85 ページ ２００４年７月１３日　火曜日　午後４時５５分 Line smoothing Sets whether or not to enable line smoothing. If this item is checked, line smoothing is enabled which results in the outlines of characters and ruled lines printing smoothly. The initial setting is off. If line smoothing is used, print time increases.

  • Page 100: Special Image Setting

    fm.book 86 ページ ２００４年７月１３日　火曜日　午後４時５５分 Special image setting Adjusts the orientation of original, print position, image quality, etc. Settings Image rotation Sets the orientation of the original. Image position adjustment Adjusts the print position of the original. Image quality Sets the quality (resolution) of printing. Auto colour matching ™...
  • Page 101 fm.book 87 ページ ２００４年７月１３日　火曜日　午後４時５５分 Image rotation Sets the orientation of original printing which is in relation to the paper. Auto/0 degree/90 degrees/180 degrees/270 degrees can be selected. If [Auto] is selected, the orientation of printing is automatically selected based on the orientation of the original set in data, the orientation of the paper set in the feed tray is ready for use.
  • Page 102 fm.book 88 ページ ２００４年７月１３日　火曜日　午後４時５５分 Image quality Sets the image quality (resolution). Standard (300dpi x 300dpi) or Fine (300dpi x 600dpi) can be selected. The initial setting is [Standard (300dpi x 300dpi)]. Auto colour matching ™ Selects whether or not to use HC5000 Series original colour management (ComColor Standard) for colour adjustment (conver- sion).

  • Page 103: Options

    fm.book 89 ページ ２００４年７月１３日　火曜日　午後４時５５分 Options Sets the method of job separation, print density, and clustering. Settings Job separation Return to default Sets the timing of separation paper insertion. Returns the settings on the [Options] tab to the default set- tings. Print density Sets the print density.

  • Page 104: Print Density

    • Print-volume-based Register the controllers using [Clustering] at [Control- Set the number of copies that triggers job split at [Job ler setting] in [Administrator] of RISO Console PS7R. split limit]. Example of "Clustering" ( p.150) is shown. The initial setting is [OFF].
  • Page 105 fm.book 91 ページ ２００４年７月１３日　火曜日　午後４時５５分 Example of Job split An example in which Job split limit is set to "100 (page)" and a job of 240 pages is processed for printing is shown. If Print range is set to "All," the job is not split and processed as a job of 240 pages. If Print range is set to 1 - 240 page, the job is split into three jobs of 80 pages respectively.

  • Page 106: Forms

    fm.book 92 ページ ２００４年７月１３日　火曜日　午後４時５５分 Forms A form registered in the printer can be selected for overlaying it on the output data for printing. Registration of form • Create form data in advance and register it in the printer by selecting [Form] at [Output mode] on the [Main setting] tab. Registered form file names are displayed in [Form list].

  • Page 107: Form Print Pattern

    fm.book 93 ページ ２００４年７月１３日　火曜日　午後４時５５分 Form print pattern Selects whether a form is printed onto the same face as output data (Single side overlay) or onto the reverse side (Double side overlay). Settings Double side overlay No form is printed. A form is printed onto the reverse face of the output data.

  • Page 108: Registration Of Form

    Registered data can be selected in [Form list] on the [Forms] tab. application. The [Print] dialog box is displayed. Check that "RISO HC5000" is selected as a printer name. Click the [Properties] button. Select [Form] at [Output mode] in the [Main setting] dialog box.

  • Page 109: How To Print A Form

    Click the [OK] button. form and select [Print] from the [File] The screen in step 1 appears again. menu of the application. Check that "RISO HC5000" is selected as a printer name and click the [Prop- erties] button. Click the [OK] button.

  • Page 110: About

    fm.book 96 ページ ２００４年７月１３日　火曜日　午後４時５５分 About.. The version of the printer driver installed in the computer can be checked. Settings Plug-in Version of plug-in Model name Model name of the printer PPD file name Name of PPD file installed in the computer...

Table of Contents