Riso HC FINISHER Technical Bulletin

MODEL: HC FINISHER
Data Category
Field Modification
Proceeding Grade
Action ASAP
Action as given
Action if required
Refer in need
HC FINISHER
SUBJECT:
[Brief]
With reference to the limited capability of HC Finisher on our HC Technical Bulletin HCT-024,
some rollers have been modified to reduce "paper-feeding-marks (ink-marks)" on the printed
documents.
The new roller is a ceramic coated roller which has ceramic tips on the surface of rubber.
This coating will prevent the roller from catching ink on surface, and reduce a transferring back
on the paper.
Red marked 7 rollers are the modified
rollers.
[Newly Registered Part]
A) 033-13233-005
B) 033-13234-001
C) 033-13235-008
D) 033-13236-004
E) 033-13237-000
F) 033-13238-007
G) 033-13239-000
Attached: HC FINISHER Roller Replacing Procedure
HC Technical Bulletin
HCT-034
ISSUE NO. :
Trouble Shooting
Parts Compatibility
Compatible
Conditionally Compatible
Not Compatible
Old Obsolete
ROLL ASSY-PUNCH
ROLL ASSY-BOOKL
ROLL ASSY-BUFFE
ROLL ASSY-EXIT
ROLL ASSY-TA2
ROLL ASSY-ENTRA
ROLL ASSY-BOOK
Issued By Overseas Technical Sec., Riso Kagaku Corp.
DATE: 10 April, 2006
General Information
Handling of Modified Parts
Free of Charge
Conditionally Chargeable
Chargeable
Our Ref. AP2-0352
(Present type roller)
<= 033-13201-006
<= 033-13202-002
<= 033-13204-005
<= 033-13206-008
<= 033-13207-004
<= 033-13209-007
<= 033-13219-002
Page
1 2
of
Safety Advice