Engine Hanger Bracket Removal - KYMCO SUPER8 50 2T Service Manual

5
. ENGINE REMOVAL/INSTALLATION
Remove the rear brake adjusting nut and
disconnect the brake cable from the
crankcase.
Remove the rear brake cable clamp and
rear brake cable.
Remove the rear shock absorber lower
mount bolt.
Remove the right and left engine
mounting nuts.
Take out the right and left engine
mounting bolts.
Lift the frame upward to separate it from
the engine and be careful not to
damage the rear fender.

ENGINE HANGER BRACKET REMOVAL

Remove the engine hanger bracket bolt and
engine hanger bracket.
The installation sequence is the reserve of
removal.
Torque: 3.5～4.5kg-m
5-3
Rear Shock Absorber Lower Mount Bolt
Rear Brake Cable
Engine Mounting Nuts
Engine Hanger
Engine Hanger Bracket Bolt
SUPER8 50 2T