Cylinder/Piston; Cylinder Removal; Piston Removal - KYMCO SUPER8 50 2T Service Manual

6
. CYLINDER HEAD/CYLINDER/PISTON

CYLINDER/PISTON

CYLINDER REMOVAL

Remove the met-in box and seat.
Remove the frame body cover.
Remove the cylinder head.
Remove the two exhaust muffler joint lock
nuts and two exhaust muffler lock bolts.
Remove the exhaust muffler.
Remove the cylinder.
Remove the cylinder gasket.
＊
Do not pry between the cylinder and
crankcase or strike the fins.

PISTON REMOVAL

Remove the piston pin clip to remove the
piston pin and piston.
＊
• Do not damage or scratch the piston.
• Do not apply side force to the
connecting rod when removing the
piston pin.
• Place clean shop towels in the
crankcase to keep the piston pin clip
from falling into the crankcase.
Spread each piston ring and remove by
lifting it up at a point just opposite the gap.
Remove the expander.
SUPER8 50 2T
Cylinder
Piston Pin
Piston Pin Clip
Piston
6-6