10
. CRANKCASE/CRANKSHAFT
Measure the crankshaft runout.
Service Limit
A
0.150mm
replace if over
Check the crankshaft bearings for excessive
play. The bearings must be replaced if they
are noisy or have excessive play.
CRANKSHAFT INSTALLATION
Wash the crankshaft in cleaning solvent and
then check for cracks or other faults.
*
• After check, apply clean engine oil to
all moving and sliding parts.
• Remove all gasket material from the
crankcase mating surfaces. Dress any
roughness or irregularities with an oil
stone.
10-5
B
0.100mm
replace if over
SUPER8 50 2T
Play
Axial
Play
Radial