Bearing Replacement - KYMCO SUPER8 50 2T Service Manual

9
. FINAL REDUCTION

BEARING REPLACEMENT

(Transmission Case Cover)
Remove the transmission case cover
bearings using the bearing remover.
Remove the final shaft oil seal.
Drive new bearings into the transmission
case cover.
BEARING REPLACEMENT (Left
Crankcase Cover)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using
the bearing remover.
9-5
Drive Shaft Bearing
Bearing Outer Driver Handle
Bearing Remover Set, 12mm
SUPER8 50 2T
Bearing Remover Set