Float/Float Valve Inspection; Jets/Screws Removal; Carburetor Passages Cleaning - KYMCO SUPER8 50 2T Service Manual

11.
CARBURETOR

FLOAT/FLOAT VALVE INSPECTION

Inspect the float for damage or fuel inside
the float.
Check the float valve seat for wear or
damage.

JETS/SCREWS REMOVAL

Before removing the throttle stop screw or
air screw, record the number of rotations
until it seats lightly. Then, remove them.
＊
Do not force the air screw against its
seat to prevent damage.
Remove the main jet and needle jet holder.

CARBURETOR PASSAGES CLEANING

Blow compressed air through all passages
of the carburetor body with an air gun.
11-9
Float Valve
Float Seat
Main Jet
Throttle Stop Screw
SUPER8 50 2T
Air Screw