10
. CRANKCASE/CRANKSHAFT
Drive a new crankshaft bearing into the right
crankcase.
Drive a new crankshaft bearing into the left
crankcase.
Install the crankshaft into the left crankcase.
*
• Apply KYMCO ULTRA motor oil or
molybdenum
crankshaft bearings and connecting
rod big end.
• Apply grease to the lip of the oil seal
and then install it.
disulfide
to
the
Bearing Outer Driver Handle
Bearing Outer Driver, 37x40mm
Bearing Driver Pilot, 17mm
Bearing Outer Driver Handle A
Bearing Outer Driver, 42x47mm
Pilot, 20mm
Crankcase Assembly Tool
SUPER8 50 2T
10-6