Bottom Cone Race Replacement; Ball Race Replacement - KYMCO SUPER8 50 2T Service Manual

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
Remove the top cone race.
＊
• Be careful not to lose the steel balls (20
on top race and 15 on bottom race).
• Clean the openings of frame covers
with clean shop towels.
Remove the front fork.

BOTTOM CONE RACE REPLACEMENT

Remove the bottom cone race using a chisel.
＊
Be careful not to damage the steering
stem and front fork.
Drive a new bottom cone race into place with
a proper driver.

BALL RACE REPLACEMENT

Drive out the top and bottom ball races.
Drive new top and bottom ball races into the
steering head using the outer driver.
Special
Outer Driver
Top Cone Race
Bottom Cone Race
Ball Race Remover
Outer Driver
INSTALLATION
Install the top and bottom steel balls.
SUPER8 50 2T
13-16