Engine Hanger Bracket Installation; Engine Installation - KYMCO Super 8 50 Service Manual

6
. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the
engine.
Install the engine hanger bracket bolt and
tighten the nut.

ENGINE INSTALLATION

Install the engine and tighten the engine
mounting bolt.
Torque: 7.0kg-m
Tighten the rear shock absorber upper
mount bolt.
Torque: 4.0kg-m
Install the removed parts in the reverse order
of removal.
＊
Route the wires and cables properly.
After installation, inspect and adjust the
following:

Throttle grip free play.

Rear brake adjustment.
Engine Hanger Bracket
Nut
Rear Shock Absorber Lower Mount Bolt
SUPER 8 50
Engine Mounting Bolt
6-4