Engine Hanger Removal - KYMCO PEOPLE 250 Service Manual

5. ENGINE REMOVAL/INSTALLATION
Remove the engine mounting bolt and pull out
the engine.
ENGINE INSTALLATION
Reverse the "REMOVAL" procedures.
Apply grease onto the O-rings, oil seals
and bush).

ENGINE HANGER REMOVAL

Remove met-in box and carrier. ( 2-6 )
Remove the body cover, center cover and rear
fender A together. ( 2-6)
Remove air cleaner. ( 5-3)
Remove the two nuts of the right and left
step bar.
Remove the right and left step bar.
Remove the engine mounting nut and engine
hanger bolt (left side).
Remove the engine mounting bolt and engine
hanger bolt (right side).
Remove the starter motor. ( 18-3 )
Remove the engine hanger.
5-5
Engine Mounting Bolt
Nuts
Step Bar
Bolt
Engine Mounting Bolt
PEOPL E 250
Nuts
Step Bar
Bolt
Engine Mounting Nut