Handlebar Installation - KYMCO SUPER8 50 2T Service Manual

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
Apply grease to the top and bottom ball races
and install 20 steel balls on the top ball race
and 15 steel balls on the bottom ball race.
Apply grease to the ball races and install the
front fork.
Apply grease to the top cone race and install
it.
Tighten the top cone race and then turn the
steering stem right and left several times to
make steel balls contact each other closely.
＊
Check that the steering stem rotates
freely without vertical play.
Install the steering stem lock nut and tighten it
while holding the top cone race.
Torque: 7.0～8.0kg-m
Install the front wheel. ( 12-15)

HANDLEBAR INSTALLATION

Install the handlebar onto the steering stem
tube and then install and tighten the bolt.
Torque: 4.5kg-m
Install the front wheel. ( 12-6)
Install the brake levers. ( 12-15)
Install the handlebar covers.
13-17
Top Steel Ball
Top Cone Race
Top Cone Race Lock Nut Wrench
Steering Stem Lock Nut Wrench
Nut
SUPER8 50 2T