KYMCO SUPER8 50 2T Service Manual page 146

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
INSPECTION
Measure the brake master cylinder I.D.
Inspect the master cylinder for scratches or
cracks.
Service Limit: 12.75mm
Measure the brake master cylinder piston
O.D.
Service Limit: 12.75mm
Before assembly, inspect the lst and 2nd
rubber cups for wear or damage.
ASSEMBLY
Before assembly, apply brake fluid to all
removed parts.
Install the spring together with the 1st rubber
cup.
＊
• During assembly, the main piston and
spring must be installed as a unit
without exchange.
• When assembling the piston, soak the
cups in brake fluid for a while.
• Install the cups with the cup lips facing
the correct direction.
Install the main piston, spring and snap ring.
Install the diaphragm.
Install the brake lever.
Main
Diaphragm
Snap Ring
SUPER8 50 2T
Master Cylinder
Spring
13-10