KYMCO SUPER8 50 2T Service Manual page 11

2
. GENERAL INFORMATION
After routing, check that the wire harnesses
are not twisted or kinked.
Wire harnesses
handlebar should not be pulled tight, have
excessive slack or interfere with adjacent
or surrounding
positions.
When a testing device is used, make sure
to understand the operating methods
thoroughly and operate according to the
operating instructions.
Be careful not to drop any parts.
When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
routed along
parts in all steering
with
SUPER8 50 2T
Do you understand
the instrument? Is
the instrument set
correctly?
Remove Rust !
2-8