A.c. Generator Installation - KYMCO SUPER8 50 2T Service Manual

7
. A.C. GENERATOR
Remove the A.C. generator flywheel using
the flywheel puller.
Remove the A.C. generator wire connector.
Remove the two pulser coil bolts and pulser
coil from the right crankcase.
Remove the pulser coil wire clamp from the
right crankcase.
Remove the two bolts attaching the A.C.
generator stator.
＊
Be careful not
disconected wire.

A.C. GENERATOR INSTALLATION

Install the A.C. generator stator and pulser
coil wire clamp onto the right crankcase,
and then install the pulser coil.
to damage the
Lock Nut Wrench
Flywheel Puller
A.C. Generator Wire
Stator
SUPER8 50 2T
Pulser Coil
Wire Clamp
7-4