Engine Removal - KYMCO SUPER8 50 2T Service Manual

5
. ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL

Remove the frame body cover. ( 12-5)
Remove the five bolts attaching the air
cleaner case.
Loosen the band between the air cleaner
and carburetor to remove the air cleaner
case.
Remove the carburetor cap.
Disconnect the
generator and
connectors.
Disconnect the oil pump control cable from
the pump body.
Disconnect the oil inlet line from the oil
pump.
Remove the spark plug cap.
＊
After the oil inlet line is disconnected,
plug the oil line opening to prevent oil
from flowing out.
auto bystarter, A.C.
starter motor wire
Carburetor Cap
Oil Pump Control Cable
SUPER8 50 2T
Air Cleaner Case
Bolt
AC Generator Wire Connector
Oil Inlet Line
Spark Plug Cap
5-2