Oil Pump Installation - KYMCO SUPER8 50 2T Service Manual

4
. LUBRICATION SYSTEM

OIL PUMP INSTALLATION

＊
• Lubricate the O-ring with grease or
engine oil before installation.
• Make sure that the oil pump is inserted
into the crankcase.
• Apply molybdenum disulfide or grease
to the pump pinion.
Install the oil pump onto the crankcase.
Install the oil pump control cable plate.
Connect the oil inlet line and oil outlet line
properly.
Connect the oil pump control cable.
Bleed air from the oil pump.
Grease or Engine Oil
Control Cable Plate
Control Cable
SUPER8 50 2T
Bolts
Oil Inlet Line
4-4